INFX Series 'Smart' Transmitters

Four Isolated Open-Collector Outputs Wide Selection of Input Types and Ranges in One Transmitter May Be DIN Rail Mounted Available Analogue Output and RS-232 or RS-485 Communications Available Remote Programmer/Display

INFXP Process Transmitter  HPXUR Programmer Display

INFINITY X Handheld Programmer/Remote Display The INFINITY X series of instruments offers a truly unique feature found in no competitive product. The optional hand-held programmer is both a convenient portable programmer and a complete, mountable, remote 6-digit display. You can buy any one programmer and program INFINITY X transmitters all over your facility. You can use the very same option as a remote display. This is especially useful when space constraints prevent you from mounting a conventional full-size meter. This remote display not only gives you an accurate readout of your process value but also has four indicator lights giving you the status of each of the setpoints. The 14-segment LEDs give you easy-to-read alphanumeric characters. This feature, along with real word programming, makes an easy task of setting up your transmitter. INFINITY X For Process The INFINITY X for process accepts a wide range of input signals from most process sensors such as pressure and temperature transmitters, pressure transducers, potentiometers, etc. Standard Features Include: • Input ranges from -500 mV to 100 V dc, 0-20 mA & 4-20 mA • 0.005% of reading accuracy • Wide choice of outputs as 4-20 mA, 1-5 V, 0-10 V, RS-232 or RS-485 • Easy scaling for transmitting in any desired engineering units • Smart filtering that detects the difference between line noise and a process change without compromising update speed • Sensor excitation of 1 to 11 V or 24 Vdc • Peak and valley memory • Up to 13 readings per second • DIN rail mounting INFINITY X For Temperature The INFINITY X for Temperature is easily configured to accept direct connection from a wide range of thermocouple, RTD or linear inputs such as 10 ohm copper RTDs.

Standard Features Include: • Thermocouple types J, K, E, T, B, R, S, N and J DIN • 2-, 3- or 4-wire 100 ohm platinum RTDs • Accepts linear inputs from 0.6 to 1000 ohms including 10 copper RTDs • Wide choice of outputs such as 4-20 mA, 1-5 V, 0-10 V, RS-232 or RS-485 • Four open-collector outputs • 0.01 resolution • Smart filtering that detects the difference between line noise and a process change without compromising update speed • Up to 13 readings per second • Programming via handheld programmer of serial communications options • DIN rail mounting INFINITY X For Strain Strain gauge INFINITY transmitters accept input signals from most strain gauge sensors such as 4- and 6-wire load cells, pressure transducers, etc. Standard Features Include: • Input ranges from -500 mV to 100 V dc, 0-20 mA & 4-20 mA • Wide choice of outputs such as 4-20 mA, 1-5 V, 0-10 V, RS-232 or RS-485 • 0.005% of reading accuracy • Easy scaling for transmitting in any desired engineering units • Smart filtering that detects the difference between line noise and a process change without compromising update speed • Programming via handheld programmer of serial communications options • Sensor excitation selectable 1.5 to 11, or 24 Vdc • 2-, 4- or 6-wire sensor connections • Up to 13 readings per second • Peak and valley memory • Tare function • DIN rail mounting INFINITY X For Scale The SCALE INFINITY transmitter (INFXW) accepts a wide range of input signals from most process sensors such as pressure transducers, force strain gauges, load cells, etc. The Scale Transmitter allows you to select the class required for your weighing applications, select standard tare, auto tare or

sequential tare, select Units-of-Measure for transmission via the optional serial RS-232 or RS-485 communications options, select minimum and maximum capacity limits and scale divisions. Each unit when powered up or reset automatically performs an integral diagnostic check to ensure accurate operations. The Scale Transmitter is compatible with virtually any pressure sensor or load cell INFINITY X For Batch Control The Batch Controller INFINITY transmitter (INFXB) is a single input unit that allows you to simultaneously count the batch, number of batches completed and the grand total of batches and transmit this data via the optional serial RS-232 or RS-485 output boards. Any of these parameters can be transmitted via the optional analogue output board. This unit also includes an integral process timer that allows you to perform critical batch operations in real time with configuration and display in hours: minutes: seconds up to 99 99 99. INFINITY X For Rate/Totalise The Ratemeter/totalizer INFINITY transmitter (INFXR) allows you to receive pulse inputs from TTL levels to 240 V ac RMS or, with the addition of the optional analogue input board, accept 0-20 or 4-20 mA dc inputs scale them to equal any engineering units you require and transmit those values via the optional serial RS-232 or RS-485 outputs. The analogue output allows you to choose whether to transmit either the rate or the total. With the addition of the optional analogue input board, you can configure your transmitter for integral square root extraction. Each unit has an integral process timer that can be configured as a 24-hour clock (99 99 99). The Ratemeter/totalizer/Transmitter will accept virtually any signal from your flow meters such as paddlewheel types, magnetic flowmeters, differential flow transmitters, etc.

Accuracy: ±0.005% rdg Span Temperature Coefficient: ±20 ppm Step Response: 1 sec to 99.9% Warmup to Rated Accuracy: 50 min Operating Ambient: 0 to 50°C, 95%RH, non-condensing Storage Ambient: -40 to 85°C Power: 230 Vac, 49-400 Hz; 10 to 32 Vdc Power Consumption: 6 W nominal, 10 W max Normal Mode Rejection: 60 dB Common Mode Rejection: 120 dB Common Mode Voltage: 1500 V peak per HV test Resolution: 15-bit Conversion: dual-slope technique Reading Rate: 3/sec or 13/sec, 60 Hz; 3/sec or 12/sec, 50 Hz Display: red or green 6-digit, 14-segment, 13.7 mm (0.54"); 4 alarm indicators Dimensions: 48 H x 96 W x 165 mm D (1.9" x 3.8" x 6.5") Panel Cutout: 45 H x 92 mm W (1.8" x 3.6"); 1/8 DIN Weight: 574 g (1.27 lb) TTL Outputs: four, isolated open collector; rated 150 mA at 1 V sink, 30 V open

BCD Output: isolated, tri-state, TTL/CMOS compatible; external 5 V supply for isolated; internal 5 V supply for non-isolated Dual Relays: form C, 7 A at 30 Vdc or 230 Vac Four Relay Option: dual 7 A relays and dual 1 A relays Analogue Output: 0-5 V/1-5 V/0-10 V/0-20 mA/4-20 mA, user selectable; 354 Vp isolation; 15-bit resolution; 0.1% accuracy, 50 msec step response RS-232 Communications: 300/600/1200/2400/4800/9600/19.2k baud; RJ11 4-wire connection; complete program setup and message display capability; programmable to transmit current display, alarm status, min/max, actual measured input value and status RS-485 Communications: 300/600/1200/2400/4800/9600/19.2k baud; RJ12 6-wire connection; addressable from 0 to 199 PROCESS INPUTS—INFXU, INFXP, INFXS, INFXW Voltage Input Ranges: 0-100 mV, 0-1 V, 0-5 V, 1-5 V, 0-10 V, 0-100 V, ±50 mV, ±500 mV, ±5 V, ±50 V

Current Input Ranges: 0-20 mA, 4-20 mA Input Configuration: single-ended Polarity: Unipolar/bipolar, programmable Span Adjustment: 0.00001 to 500,000; programmable Offset Adjustment: 0 to 999,999 or 0 to -99,999; programmable TEMPERATURE INPUTS—INFXU, INFXT Thermocouple Input Types: J, K, T, E, R, S, B, N, J DIN RTD Input: any 6 to 6k NIST or DIN platinum and any linear RTD RTD Connection: 2, 3 or 4 wire Sensor Break Protection: upscale or downscale, programmable Overvoltage Protection: 25 V peak SENSOR EXCITATION—INFXP, INFXS, INFXU, INFXW Sensor Excitation, INFXS, INFXU, INFXW: 10 V to 30 mA; 24 V to 25 mA Sensor Excitation, INFXP: 24 V to 25 mA

Model Number	Range Code	Range
INFXU, INFXP, INFXS, INFXW	DC1 DC2 DC3 DC4 DC5 DC6 DC7 DC8 DC9 DC10 C1 C2	0-100 mV 0-1 V 0-5 V 1-5 V 0-10 V 0-100 V ±50 mV ±500 mV ±5 V ±50 V 0-20 mA 4-20 mA
INFXU, INFXT	J(*) K(*) E(*) T(*) B(*) R(*) S(*) N(*) JDIN(*) RTD1(*) RTD2(*) RTD(*)	J-Iron-Constantan K-CHROMEGA -ALOMEGA E-CHROMEGA -Constantan T-Copper-Constantan B-Pt30%Rh-Pt6%Rh R-Pt13%Rh-Pt S-Pt10%Rh-Pt N-Nicrosil-Nisil J DIN-Iron-Constantan RTD 10 CE Copper RTD 100 Pt 0.00385 RTD 100 Pt 0.00392
* Specify C (Celsius), F (Fahrenheit) or K (Kelvin)

Display/Programming Module

Model No.	Description	Price
HPXUR	Programmer/display, red LED	£ 95
HPXUG	Programmer/display, green LED for INFP, INFT, INFS	105
HPX7R	Programmer/display, red LED for INFXR, INFXB	95
HPX7G	Programmer/display, green LED for INFXR, INFXB	105
HPXWR	Programmer/display for INFXW, red LED	95
HPXWG	Programmer/display for INFXW, green LED	105
One programmer can support all of your INFX transmitters. Supplied with 2 m of cable and all connectors, the display/programmer can be used to set up or reconfigure an INFX transmitter or be permanently installed as a remote display.

Accessories

Model No.	Description	Price
HPB	Bail mount	£35
9SC2	9-pin RS-232 connector	23
9SC4	9-pin RS-485 connector	23
25SC2	25-pin RS-232 connector	23
25SC4	25-pin RS-485 connector	23